manualshive.com logo in svg

Hyundai Tucson 2014, Owner'S Manual

Share
Download
Hyundai Tucson 2014 Owner'S Manual Download Page 378

5-57

Dri
ving y

o

ur v

ehicle

5

3.Push the lever (1) down (to SET-) ,

and release it. The SET indicator
light will illuminate.

4.Release the accelerator pedal.

✽

NOTICE

The vehicle may slow down or speed
up slightly while going uphill or
downhill.

To increase cruise control
speed 

• Push the lever (1) up (to RES+)

and hold it, while monitoring the
SET speed on the instrument clus-
ter. Release the lever when the
desired speed is shown and the
vehicle will accelerate to that
speed.

• Push the lever (1) up (to RES+)

and release it immediately. The
cruising speed will increase 2.0
km/h (1.2 mph) or 1.6 km/h (1.0
mph) each time the lever is operat-
ed in this manner.

• Depress the accelerator pedal.

When the vehicle attains the
desired speed, push the lever (1)
down (to SET-).

OLMB053038

OLMB053039

Summary of Contents for Tucson 2014



























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands