background image

OWNER'S MANUAL

Operation
Maintenance
Specifications

All information in this Owner's Manual is current at the time of publica-
tion. However, Hyundai reserves the right to make changes at any time
so that our policy of continual product improvement may be carried
out.

This manual applies to all models of this vehicle and includes descrip-
tions and explanations of optional as well as standard equipment. As a
result, you may find material in this manual that does not apply to your
specific vehicle.

Please note that some models are equipped with Right-Hand Drive
(RHD). The explanations and illustrations for some operations in RHD
models are opposite of those written in this manual.

Summary of Contents for Tucson 2014



























































































































































































































































































































































































































































































































































Reviews: