05
5-63
2. When the High Beam Assist camera
is adversely affected by an external
condition. Such examples may
include:
•
When the vehicle’s headlamps
have been damaged or not
repaired properly.
•
When the vehicle headlamps are
not aimed properly.
•
When the vehicle is driven on a
narrow curved road or rough road
•
When the vehicle is driven on an
uphill road or downhill road
•
When only part of the vehicle in
front is visible on a crossroad or
curved road.
•
When there is a traffic light,
reflecting sign, flashing sign or
mirror.
•
When the road conditions are bad
such as being wet or covered with
snow.
•
When a vehicle suddenly appears
from a curve.
•
When the vehicle is tilted from a
flat tire or being towed.
•
When Lane Keeping Assist system
warning light illuminates.
•
When the light from the on-coming
or front vehicle is not detected
because of exhaust fume, smoke,
fog, snow, etc.
•
When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged.
3. When the forward visibility is poor.
Such examples may include:
•
When the headlamps of an on-
coming vehicle or a vehicle in front
is not detected due to poor outside
visibility (smog, smoke, dust, fog,
heavy rain, snow, etc.).
•
When the windshield visibility is
poor.
WARNING
•
Do not attempt to disassemble
the front view camera without the
assistance of an authorized HYUNDAI
dealer technician. If the front camera
is removed for any reason, the
system may need to be re-calibrated.
Have the system inspected by an
authorized HYUNDAI dealer.
•
If the windshield of your vehicle is
replaced, most likely the front view
camera will need to be re-calibrated.
If this occurs, have your vehicle
inspected and have the system re-
calibrated by an authorized HYUNDAI
dealer.
•
Be careful that water doesn’t get into
High Beam Assist unit and do not
remove or damage related parts of
High Beam Assist system.
•
Do not place objects on the crash
pad that reflect light such as mirrors,
white paper, etc. The system may
malfunction if sunlight is reflected.
•
At times, High Beam Assist system
may not work properly. The system
is for your convenience only. It is the
responsibility of the driver for safe
driving practices and always check
the road conditions for your safety.
•
When the system does not operate
normally, change the headlamp
position manually between the high
beam and low beam.
