FEATURES AND CONTROLS
Quick Reference Guide I
11
10
I
Quick Reference Guide
HYUNDAI
SONATA HYBRID/PLUG-IN HYBRID
CHARGING THE VEHICLE
You can charge your vehicle
by using a public charger at an
electricity charging station.
Open the hood and slightly pull the
emergency cable.
240V (Level 2 Charger)
Emergency Charging Door Release
1. Move the shift lever to P (Park),
turn off all switches, and turn
OFF the vehicle.
2. Open the charging door, and
the charging inlet cover (to open
the cover, driver door must be
unlocked).
3. Insert the charging connector into
the charging inlet until you hear a
clicking sound.
4. Check if the charging cable
connection indicator in the
instrument cluster is turned ON.
NOTE:
You can also have a Level 2
charger installed in your garage by
a qualified manufacturer to your
local electrical codes.
HYBRID BATTERY VENT
The Hybrid battery air intake vent is
located at the left side of the rear seat.
Do not cover the air vent or spill liquid.
HOMELINK WIRELESS GARAGE CONTROL SYSTEM
Standard Programming
To train most devices, follow
these instructions:
1. For first-time programming,
press and hold the two
outside buttons. ( , ),
HomeLink
®
Channel 1 and
Channel 3, until the indicator
light begins to flash (after
10 seconds). Release both
buttons. Do not hold the
buttons for longer than 20
seconds.
2. Position the end of your
hand-held transmitter 1-3
inches (2-8 cm) away from
the homeLink
®
button you
wish to program while
keeping the indicator light
in view.
3. Simultaneously press and
hold both the HomeLink
®
and hand-held transmitter
buttons until the
HomeLink
®
indicator light
changes from a slow to a
rapid blinking light. Now
you may release both the
HomeLink
®
and hand-held
transmitter buttons.
Flashing
Flashing
