manualshive.com logo in svg

Hyundai Sonata 2017, Owner'S Manual, Page: 515 / 563

Share
Download
Hyundai Sonata 2017 Owner'S Manual Download Page 515

7-70

Maintenance

Headlamp, Position Lamp,
Turn Signal Lamp and 
Side Marker Light Bulb
Replacement

Type A

(1) Headlamp (Low)
(2) Headlamp (High)
(3) Side marker
(4) Turn signal lamp
(5) Daytime running lamp/ 

Position lamp

Headlamp (Halogen bulb)

• Always handle them carefully, and

avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.

• Never touch the glass with bare

hands. Residual oil may cause the
bulb to overheat and burst when lit.

• A bulb should be operated only

when installed in a headlamp.

• If a bulb becomes damaged or

cracked, replace it immediately
and carefully dispose of it.

OLF074051N

OLMB073042L

•

Handle halogen bulbs with
care. Halogen bulbs contain
pressurized gas that will pro-
duce flying pieces of glass
that could cause injuries if
broken.

•

Wear eye protection when
changing a bulb. Allow the
bulb to cool down before han-
dling it.

WARNING  

Summary of Contents for Sonata 2017




















































































































































































































































































































































































































































































































































































Reviews:

No comments