Hyundai Sonata 2017 Owner'S Manual Download Page 246

Page: 246 / 563

3-161

Con

enient f

eatur

es of y

our v

ehicle

GPS Time check

The clock is automatically updated
through the navigation system.

GPS Time non-check

The clock can be manually adjusted.
1. Select the "System Settings" on

the "INFO/Setup" screen.

2. Select the "Clock Settings".
3. Select the "Time Settings" by

rotating the controller on the cen-
ter console panel.

4. Select the "Time Format" to the 12

hour or 24 hour format.

For more information, please refer to
the manual that was separately sup-
plied with your vehicle.

Clothes Hanger (if equipped)

To hang items, pull the hanger down.
These hangers are not designed to
hold large or heavy items.

Do not hang other objects such
as hangers or hard objects
except clothes. Also, do not put
heavy,

sharp or breakable

objects in the clothe pockets. In
an accident or when the curtain
air bag is inflated, it may cause
vehicle damage or personal
injury.

WARNING

OLF044271

■

Rear

■

Door post

OLF044482N

Summary of Contents for Sonata 2017




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Sonata 2017

Reviews:

Hyundai Sonata 2017, Owner'S Manual, Page: 246 / 563

Search results

Summary of Contents for Sonata 2017

Reviews: