ENG - 32
Troubleshooting
Problem
Possible cause
Solution
The iron is plugged in but the
soleplate is cold.
There is connecton problem.
Check the main cord, the plug
and the wall socket.
lThe iron does not produce
any stream.
There is not enough water in
the water tank.
Fill the water tank.
The stream kontrol has been
set to positron „0“
Set the stream control to hi
-
gher position.
The iron is not hot enough.
Selectan ironing temperatu
-
re that is suitable for stream
ironing. Put the iron on its heel
and wait until the amber pilot
has gone out before you start
ironing.
Water droplets drip onto the
fabric.
The cap of the filling opening
has not been closed properly.
Close the cap properly. You
will hear a click
Flakes and impurities come
out of the soleplate during
ironing.
You have been using hard
water, which has caused
scale flakes to develop inside
soleplate.
Use the self- clean function a
few times.
Technical specifications
- Steam iron
- Ceramic soleplate
- Variable steam 18-25 g/min
- Horizontal steam 80 g/min
- Self cleaning
- Anti-Calc function
- Anti-drip system to prevent water escaping from the soleplate
- Dry/steam/spray, variable steam, vertical steam
- Large 300 ml water tank.
- Water fillbeaker
- Color: white/grey
- Power supply 230 V ~ 50 Hz
- Power drain 2200 W
- Size: 29,5 x 15 x 12,2 cm
- Weight: 1,2 kg
We reserve the right to change technical specifications.
Summary of Contents for SI 228B
Page 34: ...Pozn mky Notatka Notes...
Page 39: ...Pozn mky Notatka Notes...
Page 40: ...Seoul Korea...