![background image](http://html1.mh-extra.com/html/hyundai/si-228b/si-228b_instruction-manual_2196575031.webp)
ENG - 31
ENG
Cleaning and Maintenance
AFTER USE
Set the steam selector knob to „0“.
Disconnect from the mains supply.
Open the water fillinginletcover.
Invert iron and shake the iron to empty the
water tank, and then stand the iron in a upright
position to allow to cool.
In order to save space, the power cord may be
easily wound around the cord stowage facility
after the iron has been cooled.
Always store the iron (with water empted from
water tank) on its heel rest, not on the solepla
-
te. Even the smallest amount of moisture will
cause corrosion and staining of the soleplate if the iron is stored with the soleplate facing
downwards.
Any deposits, starch residue or size left on the plate can be removed using a damp cloth or
an unabrasive liquid detergent.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.
Self-cleaning
Your iron will give the best ironing results and last longer if you apply „self-cleaning“ regularly
(once or twice a month) to remove any scale or fluff.
Set the steam selector knob to position „0“.
Fill the water tank up to „max“ water level with water filling beaker supplied.
Place the iron on its heel.
Set the temperature dial to „MAX“.
Plug into the mains supply.
Allow the iron to heat up until the heating indicator light first goes out and then come son
again.
Remove the plug from the wall socket.
Hold the iron over the sink, press and hold the self clean button P11 ang gently abake the iron
to and from.
Release the self clean button as soon as all the water in the tank has been used up.
CARE AND CLEANING
Disconnect from the mains supply by removing the plug.
Certain fabric finish residues may build up on the soleplate, these may be removed by clea
-
ning with a rough cloth soaked in a vinegar water solution. Dry with a cloth.
Do not use abrasives or scouring pads to clean the soleplate. Keep the soleplate smooth:
avoid hard contact with metal objects. Do not scratch or damage the surface of the soleplate.
Wipe the outside housing with a damp cloth and polish with a dry one. Do not use abrasives
or harsh cleaners as they may damage the surface of the iron.
Avoid scratching the plate with steel wool or metallic objects.
Do not put vinegar or other descaling agents into the water tank.
To clean steam holes - simply use a damp cloth to wipe away any build up of lint or starch
from inside steam holes.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Summary of Contents for SI 228B
Page 34: ...Pozn mky Notatka Notes...
Page 39: ...Pozn mky Notatka Notes...
Page 40: ...Seoul Korea...