Hyundai Santro, Owner'S Manual, Page: 33 / 289

"
&$%'
#%#$&'
!"'
%!'
&&
The seat belt pre-tensioner system
consists mainly of the following com-
ponents. Their locations are shown in
the illustration:
(1) SRS air bag warning light
(2) Retractor pre-tensioner assembly
(3) SRS control module
8KMB3311/H
•
Always wear your seat belt and
sit properly in your seat.
•
Do not use the seat belt if it is
loose or twisted. A loose or
twisted seat belt will not protect
you properly in an accident.
•
Do not place anything near the
buckle. This may adversely affect
the buckle and cause it to func-
tion improperly.
•
Always replace your pre-tension-
ers after activation or an acci-
dent.
•
NEVER inspect, service, repair or
replace the pre-tensioners your-
self. This must be done by an
authorized HYUNDAI dealer.
•
Do not hit the seat belt assem-
blies.
WARNING
Do not touch the pre-tensioner
seat belt assemblies for several
minutes after they have been acti-
vated. When the pre-tensioner
seat belt mechanism deploys dur-
ing a collision, the pre-tensioner
can become hot and can burn
you.
WARNING
Body work on the front area of the
vehicle may damage the pre-ten-
sioner seat belt system.
Therefore, we recommend the
system to be serviced by an
authorized HYUNDAI dealer.
CAUTION