Hyundai Santro, Owner'S Manual, Page: 136 / 289

$!
"*(')(#& %*)'
C Connecting a paired device
To use a Bluetooth device on your
system, connect the paired device to
the system. Your system can connect
with only one device at a time.
1. From the control panel, press the
[PHONE] button, and then select
Phone settings Paired devices.
• If there is no connected device,
press the Call/Answer button on
the steering wheel.
2. Turn the [TUNE] knob to select the
device to connect, and then press
the knob.
• If another device is already con-
nected to your system, discon-
nect it. Select the connected
device to disconnect.
• If a connection ends because a
device is out of the connection
range or a device error occurs, the
connection will be restored auto-
matically when the device enters
the connection range or when the
error is cleared.
• Depending on auto connection pri-
ority, connection to a device may
take time.
Disconnecting a device
If you want to stop using a Bluetooth
device or connect another device,
disconnect your currently connected
device.
1. From the control panel, press the
[PHONE] button, and then select
Phone settings Paired devices.
2. Turn the [TUNE] knob to select
your currently connected device
and then press the knob.
3. Press the [1 RPT] button to select
Yes.
Deleting paired devices
If you no longer want a Bluetooth
device paired or if you want to con-
nect a new device when the
Bluetooth device list is full, delete
paired devices.
1. From the control panel, press the
[PHONE] button, and then select
Phone settings Delete devices.
2. Turn the [TUNE] knob to select the
device to delete, and then press
the knob.
3. Press the [1 RPT] button to select
Yes.
• When you delete a paired device,
the Call history and Contacts stored
in the system are also deleted.
• To re-use a deleted device, you
must pair the device again.
NOTICE
NOTICE