Driver Assistance System
7-124
• Rear Cross-Traffic Collision-
Avoidance Assist operates when all
the following conditions are satisfied:
- The gear is shifted to R (Reverse)
- Vehicle speed is below 5 mph (8
km/h)
- The approaching vehicle is within
approximately 5 ft. (1.5 m) from the
left or right side of your vehicle
- The speed of the vehicle
approaching from the left and right
is above 3 mph (5 km/h)
• Emergency braking is assisted to help
prevent collision with approaching
vehicles from the left and right.
WARNING
Brake control ends when the conditions
of the approaching vehicle from the
rear left or right side are as below:
-
The approaching vehicle is out of the
detecting range
-
The approaching vehicle passes
behind your vehicle
-
The approaching vehicle does not
drive toward your vehicle
-
The approaching vehicle speed slows
down
-
The driver depresses the brake pedal
with sufficient power
ONX4OB071089
ONX4OB071089
Stopping vehicle and ending brake control
• When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message appears
on the cluster.
• For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
• Brake control ends after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
• During emergency braking, braking
control by Rear Cross-Traffic Collision-
Avoidance Assist automatically
cancels when the driver excessively
depresses the brake pedal.
Summary of Contents for Santa Cruz 2022
