EN - 32
LISTENING TO RADIO
MANUAL TUNING
1. Select Function Selector (7) to “TUNER” position.
2. Tune to the required station by turning the Tuning Knob(19).
3. Adjust the Volume Knob(18) to desired volume level.
FM & FM-STEREO RECEPTION
● Set the FM Mode Selector (10) at “FM” position. Program are received in Mono mode.
In particular when stereo signal are weak. It is preferable to receive the program in Mono.
● Set the FM Mode Selector (10) at “FM-ST” position for receiving stereo programs.
The FM-Stereo LED Indicator (20) will light up to show FM Stereo program is receiving.
HINTS FOR BEST RECEPTION:
- FM: The receiver has a built-in FM Wire Antenna (27) hanging at the rear cabinet. This wire
should be totally unraveled and extended for best reception.
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA
CONNECTING
The system is able to decode and playback all MP3 file which stored in the memory media with
USB connecting port.
1. Set Function Selector (7) at USB mode.
2. Plug-in the USB with the face up and make sure it
going into completely.
●
Connecting the USB upside down or backwards
could damage the audio system or the storage
media(USB thumb drive). Check to be sure the
direction is correct before connecting.
●
The system will start reading the storage media
automatically after connecting and will start to
playback automatically.
Remark: USB port does not support connection with USB extension cable and is not
designed for communicate with computer directly.
●
PLAY / PAUSE / STOP MODE
1. Press “Play / Pause / Stop” button (14) once to pause the playback, the playing time will be
freeze & flashing on the LCD display (2). Press again to resume normal playback.
2. If press and hold the “Play / Pause / Stop” button (14) for two seconds during playback mode.
The system will go to stop mode.
