ENG
ENG - 71
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output via
the FL and FR speaker respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR
speaker.
NOTE:
This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF OFF: There will be no digital audio signal output. (Coaxial off)
SPDIF RAW: The digital audio signal output will be in its raw format.
Normally, this mode is used for DTS & Dolby Digital 5.1 signals.
SPDIF PCM: The digital audio signal output will be in PCM format.
Normally, this mode is used for audio CD signals.
2.2.2 LPCM OUTPUT
When DIGITAL OUTPUT is set to SPDIF PCM , this item is available.
Select a sample rating for the digital audio output. There are two options, 48KHz and 96KHz.
NOTE:
Some amplifiers don‘t support 96KHz sampling which will affect the coaxial output.
2.3 HDCD (High Definition Compatible digital)
HDCD (High Definition Compatible digital) is a patented encode/decode process for delivering
the full richness and details of the sound from HDCD-encoded Cds.
You can select the digital filter at 2x, 1x or off.
2.4 KARAOKE SETUP
2.4.1MIC SETUP
2.4.1.1 MIC
Set this item to ON/OFF to switch on/off the connected microphone.
2.4.1.2 MIC VOL
Enter this item, then use direction key [ ]/[ ] to adjust the microphone volume.
Then press [ENTER] to confirm your adjustment.
2.4.1.3 ECHO LEVEL
Enter this item, then use direction key [↑]/[↓] to adjust the microphone echo level.
Then press [ENTER] to confirm your adjustment.
3 DOLBY DIGITAL SETUP
3.1 DUAL MONO
STEREO: The player outputs the left-channel audio and right-channel audio via the FL and FR
speaker respectively.
L-MONO: The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO: The player outputs the right-channel audio only via both the FL and FR speaker.
MIX- MONO: The player outputs the average signal of the left-channel and right-channel audio
via the FL speaker and the FR speaker.
NOTE:
This function only applies to the Dolby AC -3 encoded 2-channel discs.
Summary of Contents for MSD 761 DRSU
Page 111: ...Poznámky Notatka Notes Megjegyzés ...
Page 112: ......
