Hyundai
09
MMA-
100/120/140/160/180/200
1) Check periodically whether inner circuit connection is in good condition (esp. plugs). Tighten the loose
connection. If there is oxidization, remove it with sandpaper and then reconnect.
2) Keep hands, hair and tools away from the moving parts such as the fan to avoid personal injury or machine
damage.
3) Clean the dust periodically with dry and clean compressed air. If welding environment with heavy smoke
and pollution, the machine should be cleaned daily. The pressure of compressed air should be at a proper
level in order to avoid the small parts inside the machine to be damaged.
4) Avoid rain, water and vapor in filter the machine. If there is, dry it and check the insulation with equipment
(including that between the connections and that between the connection and the enclosure). Only when
there are no abnormal phenomena anymore, then the machine can be used.
5) Check periodically whether the insulation covers of all cables is in good condition. If there is any dilapida-
tion, rewrap it or replace it.
6) Put the machine into the original packing in dry location if it is not to be used for a long time.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
8. Maintenance
