3-32
Convenient features of your vehicle
3. Go to the front of the vehicle, raise
the hood slightly, push the second-
ary latch up (1) inside of the hood
center and lift the hood (2).
4. Pull out the support rod.
5. Hold the hood opened with the
support rod (1).
Closing the hood
1. Before closing the hood, check the
following:
• All filler caps in motor room must
be correctly installed.
• Gloves, rags or any other com-
bustible material must be removed
from the motor compartment.
2. Return the support rod to its clip to
prevent it from rattling.
3. Lower the hood halfway (lifted
approximately 30cm from the
closed position) and push down to
securely lock in place. Then double
check to be sure the hood is secure.
If the hood can slightly be raised, it
is not securely locked. Open it
again and close it with more force.
OAEE046005
•
Grasp the support rod in the
area wrapped in rubber. The
rubber will help prevent you
from being burned by hot
metal.
•
The support rod must be
inserted completely into the
hole provided whenever you
inspect the motor compart-
ment. This will prevent the
hood from falling and possi-
bly injuring you.
WARNING
OAD045039
Summary of Contents for IONIQ ELECTRIC 2017
