QUICK RELEASE NOZZLES
0
o
RED
15
o
YELLOW
40
o
WHITE
Soap
BLACK
The quick–release on the lance allows you to switch between four different
quick-release nozzles. The nozzles can be changed while pressure washer
is running once spray gun trigger safety lock is
engaged. The different nozzles vary the spray pattern as shown above.
WARNING
The high pressure stream of water that this equipment
produces can cut through skin and its underlying tissues,
leading to serious injury and possible amputation.
• NEVER change nozzles without the trigger safety lock engaged on the
spray gun.
• DO NOT twist nozzles whilst spraying.
Follow these instructions to change the nozzles:
1. Pull back collar on quick–connect and pull current nozzle off. Store
nozzles in holder provided on the handle. Storing nozzles in the
designated holder will help prevent debris clogging the tip.
2. Select desired nozzle:
• For gentle rinse, select white 40° nozzle.
• To scour surface, select yellow 15° or red 0° nozzle.
• To apply detergent, select black nozzle.
3. Pull back on collar, insert new nozzle and release collar. Tug on nozzle
to make sure it is securely in place.
Usage Tips
• For most effective cleaning, keep nozzle from 8 to 24 inches away from
cleaning surface.
• If you get nozzle too close, especially using a high pressure nozzle, you
may damage surface being cleaned.
Page 21
Summary of Contents for HYW2400P
Page 1: ...PRESSURE WASHER Models HYW2400P User Manual ...
Page 29: ...Page 29 ...
Page 30: ...Page 30 ...
Page 31: ...Page 31 ...
