Hyundai HYUVC009, Instruction Manual

Page: 25 / 36

Accessories
After any vacuuming it is recommended to check visually the brushes or collectors for
possible impurities. If there are some impurities, remove them.
Input and output filters
Rinse the output filter A8 under running water.
Shake out the HEPA filter
B6
gently, or blow it out. If the HEPA filter is very dirty, you can
rinse it under running lukewarm water. Allow it to dry out properly.
Caution
– Do not clean the HEPA filter or the other filters with any aggressive washing or cleaning
detergents or hot water.
– In order to maintain the filtering parameters of the HEPA filter, we recommend that you
use a dry method of cleaning.
– If you clean the HEPA filter with water, its filtration properties will deteriorate.
The filter cannot be washed more than three times. After that, a new filter needs to be
purchased.
– If the filters are not cleaned or replaced, it might result in damaging the vacuum cleaner!
Dust container
Rinse the plastic parts (
B2
-
B5, B7
) under running water. Allow all the parts to dry out
properly before their re-use.
Other parts
Clean the plastic suction tubes
C6
, suction hose
C5
, cover
B1
and outlet grid
A7
with a wet
cloth. Allow all the parts to dry out properly before re-use.
VII. TECHNICAL DATA
Voltage (V) / Input (W) specified on the type label of the appliance
Protection class of the appliance II.
Weight (kg) approx. 3.7
Size of the product (mm) 390 x 250 x 290
Input in off mode is 0.00 W
VIII. LEGISLATIVE & ECOLOGY
WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO
AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE
PRODUCT WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE
AREN’T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY
CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE.
THE PRODUCT IS UNDER A DANGEROUS TENTION.
EN
25 / 31