For inquiries please contact:
Licensed by HYUNDAI Corporation Holdings, Korea
E-mail: [email protected]
Imported/Distributed by Azoogi Pty Ltd
www.hyundailighting.com.au
Download App
Download “Smart Life –
Smart Living” app from Apple store or Google Play and install it into your smart
phone or tablet device.
Alternatively, scanning the QR code below will take you to the app’s download
page.
Registration and Login
1.
Open the “Smart Life –
Smart
Control” app from your smart phone.
2.
Follow the prompts to register and login
Add device
1.
Connect the
RGBW Garden Light
LED driver to a power source. Once connected, the lights will start
blinking rapidly cycling through red, blue, and green colours. To enter pairing mode, connect and
disconnect the connector between the smart controller and the LED driver 3 to 5 times. Finally, the
connector must be in connected state. The lights should now be only RED in colour indicating it has
entered pairing mode.
2.
Turn on the Bluetooth in your smart phone or tablet.
3.
In the Smart Life app, press the (+) symbol on the top right-hand corner. When device window pops
up with the light to add, press “Go to add”.
4.
Pairing process will begin. Do not turn off the strip while pairing and wait for the pairing process to
complete. If you get a message that says -
“Failed to Add”, repeat the steps
from 1 to 3 to pair the
device.
5.
Once the device has been successfully added, you can begin using it.
Cleaning
Before cleaning, disconnect from mains supply and allow the garden light to cool. Only use a damp,
microfibre cloth for cleaning. A diluted solution of a mild pH-neutral liquid detergent can be used for
resistant dirt. Do not use high pressure cleaners.
The RCM marking of this product applies to
AS/NZS CISPR15
(EMC) “Limits and methods of
measurement of radio disturbance characteristics of electrical lighting and similar equipment”. This
product is designed to conform to
AS/NZS60598
“Luminaires, general requirements and tests”.
