ENG - 27
ENG
Fig. 1
Fig. 2
• The unit will not function while the dust collector is removed and/or the back cover is
removed.
• Always restore the dust collector and the back cover to their respective positions after
cleaning.
SELF CHECK BEFORE REPAIR
In case of malfunction, please check the following table to solve the problems. If problems persist,
please contact your distributor or send to appointed maintenance center for repair.
MALFUNCTION
CAUSE
SOLUTION
Operating indicator off,
machine stop operating
Electric plug falls off from
socket
Plug into electric socket
Plug looses, does not contact
well to the socket
Plug into electric socket tightly
and completely
Operating stop midway
Operation period set by the
timer arrives its end
No malfunction, restart the
unit or reset the timer
Loud noise
Dust collector is fully filled with
dirt
Clean the dust collector
Operate in humid area
Place the machine to dry
place
UV lamp is not lit
Uv lamp is broken or out of
service
Refer to page 27 of the
manual and replace new lamp
Television, radio signal
distorted or interfered
Dust collector is fully filled with
dirt
Clean the dust collector
Operate within 1 meter from
television set or radio
Move the machine 1 meter
away from television set or
radio
