Page 19
Rev 2
6.1.
Emptying the fuel tank.
6.1.1.
Place the machine on even and stable surface. Warm up the engine for several minutes and
then stop it.
6.1.2.
Loosen the fuel tank cover and remove it.
6.1.3.
Drain fuel into a container thoroughly.
6.1.4.
Press the intake pump several times until fuel begins to empty the bulb.
6.1.5.
Drain fuel again.
6.1.6.
Reinstall the fuel tank cover. Store the machine, operating instructions and where necessary
the accessories in the original packaging. In this way you will always have all the information
and parts ready to hand. Pack the device well or use the original packaging in order to avoid
transit damage.
6.1.7.
Store the machine in dry and well ventilated surroundings and with the fuel tank empty.
6.1.7.1.
Do not store fuel next to the machine.
Failure to do so may cause corrosion to the carburettor.
7.
SPECIFICATION
MODEL
HYT2318
HYT2622-II
Engine Type
1E32FN
1E34F-2
Engine Size cc
23
25.4
Fuel tank capacity ml
500
500
Noise Level dB
111
112
Rated Speed rpm
3200 (Idle)
3200 (Idle)
Rated Power kw
0.6
0.8
Drive Type
Direct
Direct
Start Method
Recoil
Recoil
Fuel Ratio/Fuel Type
Mineral 2-stroke oil : 25:1 -
Synthetic 2-stroke oil: 40:1
Mineral 2-stroke oil : 25:1 -
Synthetic 2-stroke oil: 40:1
Cutting Width mm /Length mm
/Diameter mm
550
660
Hedge trimmers - Recommended
maximum cutting diameter
15
15
Gross Weight kg
5.8
9
Dry Weight kg
4.2
6.5
Fully Assembled Dimensions L x W
x H mm
980 x 230 x 210
1280 x 230 x 210
Extensions mm/kg
N/A
N/A
Box Dimensions L x W x H mm
1010 x 230 x 220
1290 x 250 x 290
Summary of Contents for HYT2318
Page 1: ......
Page 20: ...Page 20 Rev 2 8 SPARE PARTS HYT2622 II...
Page 23: ...Page 23 Rev 2 HYT2318...