background image

HYUNDAI

07

HYSC-7000 has nine modes: Standby, 12V NORM, 12V COLD/AGM, 24V NORM, 24V COLD/AGM, 12V 
AGM+, 12V LITHIUM, 12V/24V REPAIR and 13.6V SUPPLY. Some charge modes must be pressed for 
three (3) seconds or / and pressed to enter the mode. Do not operate the charger until you confirm the 
appropriate charge mode for your battery.

CAUTION:

 

- Check the battery's Voltage & Type, before using.
- If you use 24V charging mode for 12V battery, battery could be damaged.

4. CHARGING MODES

Mode

Indicator 

No.

LED 

light

Battery

Size 

(Ah)

Explanation

Standby

3

Green

-

Not charging or providing any power

12V NORM

4

Green

14-230

Charging 12V WET/GEL/MF/EFB batteries

12V COLD/

AGM

5

Green

14-230

Charging 12V batteries below 10˚C (50˚F)

or 12V AGM battery

24V NORM

6

Blue

14-115

Charging 24V WET/GEL/MF/EFB batteries 

24V COLD/

AGM

7

Blue

14-115

Charging 24V batteries below 10˚C (50˚F)

or 24V AGM batteries 

12V AGM+

8

Blue

14-230

Charging 12V advanced AGM batteries 

that requires a higher than normal charging voltage

12V 

LITHIUM 

9

White

14-230

Charging 12V lithium-ion batteries only,

including LiFePO4

12V/24V

REPAIR

10

Yellow

14-230

An advanced battery recovery mode for repairing old, 

idle, stratified or sulfated batteries.

4~5

Green

6~7

Blue

8

Blue

13.6V

SUPPLY

11

Yellow

-

Converting to a DC power supply for powering 12V DC 

device or as a memory retainer 

when replacing a battery 

(When the charger is not connected with battery) 

!

Summary of Contents for HYSC-7000

















Reviews: