HYSC
-4000M
04
3. ABOUT HYSC-4000M
1) The HYSC-4000M is designed for charging all types of 6V lead-acid and 12V lead-acid batteries,
including WET (Flooded), MF (Maintenance-Free), EFB (Enhanced Flooded Battery), GEL, AGM (Absorbed
Glass Mat) batteries. It is suitable for charging battery capacities from 1.2 to 130 Amp-Hours and
maintaining all battery sizes.
2) Built-in intelligent microprocessor makes charging faster, easier and safer.
3) This charger has safety features, including spark proof, protection for reverse polarity, short circuit,
overheat and overcharge.
4) It has auto-memory, which returns to last selected mode when restarted (except Repair Modes).
5) When the battery level indicator bars are flashing, it is on charging; when 5 bars are solid, the charging is
completed. But do NOT break the connection immediately. It will automatically switches from full charge
to maintenance status without overcharging or damaging the battery.
6) Following is the charger’s technical specification:
AC Input
AC 220~240V, 50/60Hz, 70W Max
DC Output
DC 6V 4A, DC 12V 4A
Power (IN)
Variable Power, 70W Max
Efficiency
85% Approx
Back Current Drain
<5mA
Ambient Temperature
0˚C ~ +40˚C
Charger Type
8 steps, Full-automatic Charging Cycle
Battery Type
All Types of 6V and 12V Lead-acid Batteries
Battery Capacity
1.2-130Ah (12V), 1.2-130Ah (6V), Maintains All Battery Sizes
Housing Protection
IP54
Accessories Included
Cable Clamps
Other Features
Norm / Cold Mode, and 8-hour Repair Process if battery voltage is too low
(only for 12V Mode)
