Always refuel in a well-ventilated area with the
engine off.
Whilst carrying out maintenance you must
wear appropriate Personal Protective
Equipment (PPE) when using this machine.
Suggested PPE Sturdy footwear, work gloves
(especially when working near blade), long
trousers and hearing protection.
6.1.
The blade.
You MUST wear gloves
to protect your hands from being cut when
working with the blade.
6.1.1. The blade is made of pressed steel, in
order to obtain a good cut sharpen the blade
frequently typically around every 25 hours of
work.
6.1.2. Following blade sharpening you must
make sure that the blade is always well
balanced.
6.1.3. To remove the blade, unscrew the
bolt, check the blade support and change all
spare parts
if
they are worn out or damaged.
6.2.
The spark plug.
You MUST allow the
spark plug to cool down before carrying out any
maintenance
6.2.1. Spark plug type (or equivalent) F7RTC.
6.2.2. To check spark plug, remove spark
plug cap and remove spark plug using the
supplied spark plug wrench.
6.2.3. Clean the spark plug electrode also
making sure that there is no damage to the
insulator or electrode.
6.2.4. The spark plug gap should be 0.70mm
to 0.80mm adjust as necessary by carefully
bending the side electrode.
6.2.5. Refit the cleaned and adjusted spark
plug by hand to avoid cross-threading.
6.2.6. After spark plug seats then tighten as
necessary but avoid over-tightening.
6.2.7. Re-attach the spark plug cap.
Page 23
Revision 5 - August 2016
Summary of Contents for HYM46SPE
