background image

Page 4 

KEY TO SYMBOLS

 

WARNING! Incorrect or careless use 
of a hedge trimmer can turn it into a 
dangerous tool that can cause serious 
or even fatal injury. It is extremely 
important that you read and 
understand the 

contents of this 

operator’s manual.

Symbols

 

Please read the operator’s manual 
carefully and make sure you 
understand the instructions before 
using the machine.

 

Always wear head, ear and eye 

protection.

This product complies with the 

applicable European directives and 

an evaluation method of conformity 

for these directives was done.

Protective gloves are highly 

recommended when working.

Non-skid heavy duty footwear are 

highly recommended when working.

Noise emission to the 

environment according to the 

European Community’s 

Directive. The machine’s 

emission is specified in chapter 

Technical data and on label. 

High temperature. Do not touch.

Do not use near open flames.

Do not smoke. 

The blade is sharp, do not touch the 

blade.

Waste electrical products should not be 

disposed of with household waste. Please 

recycle where facilities exist. Check with 

your local authority or local store for 

recycling advice.

Other symbols/decals on the machine refer to special 
certification requirements for certain markets.

 

The engine is switched off by moving the 
stop switch to the stop position.

 

CAUTION! The stop switch 
automatically returns to the start 
position. In order to prevent

 

unintentional starting, the spark plug cap must be 
removed from the spark plug when assembling, checking 
and/or performing maintenance.

 

Always wear approved protective 
gloves.

 

Regular cleaning is required.

 

Visual check.

 

Protective goggles or a visor must be 
worn.

 

DO NOT 

use in an enclosed 

area or moving vehicle

 

Summary of Contents for HYHT2600X

























Reviews: