Page 10
FUEL HANDLING
Fueling
•
Always use a fuel container with an anti-spill valve.
•
Clean the area around the fuel cap. Contamination in
the tank can cause operating problems.
•
Ensure that the fuel is well mixed by shaking the
container before filling the tank.
Do not smoke or place hot objects near
fuel.
Always shut off the engine before
refuelling.
Refuel in a well ventilated area. Never
fuel the machine indoors.
Always stop the engine and let it cool for
a few minutes before refuelling.
When refuelling, open the fuel cap slowly
so that any excess pressure is released
gently.
Tighten the fuel cap carefully after
refuelling.
Always move the machine away from the
refuelling area and source before
starting.
WARNING! Taking the following
precautions, will lessen the risk of fire:
Mixing
•
Always mix the petrol and oil in a clean container
intended for fuel.
•
Always start by filling half the amount of the petrol to
be used. Then add the entire amount of oil. Mix
(shake) the fuel mixture. Add the remaining amount of
petrol.
•
Mix (shake) the fuel mixture thoroughly before filling
the machine’s fuel tank.
•
Do not mix more than one month’s supply of fuel at
a time.
•
If the machine is not used for some time the fuel
tank should be emptied and cleaned.
•
Fuel/Oil ratio is 40:1
WARNING! The catalytic converter
muffler gets very hot during and after
use. This also applies during idling. Be
aware of the fire hazard, especially when
working near flammable substances and/
or vapours.
!
!
Summary of Contents for HYHT2600X
