22
WARNING
You MUST STOP using the machine if any of the following occur.
The engine speed changes with no control.
In case of misfire or unusual noise.
In case of high vibration.
If belts are slipping.
In rain or stormy weather.
CAUTION
If you are not familiar with this type of machine you should seek advice and guidance
from your dealer.
DO NOT
attempt to lift or move the machine while the engine is running.
CAUTION
FOR OUTDOOR USE ONLY
.
This machine produces carbon monoxide – a poisonous, colourless & odourless gas
that can cause death or serious injury.
Petrol is highly flammable, always handle with extreme care and in a well ventilated
area.
Always remove the HT lead from the spark plug when checking the machine or
changing parts.
7.0
Position the machine on flat, level ground and in such a way so it cannot move during
operation.
7.1
DO NOT
overload the machine.
Use the correct machine for your application.
The correct machine will do the job better and safer at a rate for which it was designed.
7.2
DO NOT
change the engine governor settings or increase the maximum engine speed.
The governor controls the maximum safe operating speed of the engine.
7.3
DO NOT
run the engine at a high speed when you are not using it.
7.4
DO NOT
put hands or feet near rotating parts.
7.5
This machine has rotating cutting knives capable of amputating hands and feet and
throwing objects.
AT ALL TIMES
you
MUST
keep hands and feet clear of all openings while the machine
is running.
Failure to observe these safety instructions could result in serious injury or death.
7.6
Avoid contact with fuel, oil, exhaust fumes and hot surfaces.
7.7
DO NOT
touch or allow clothing or any other flammable materials to come into contact
with the engine or exhaust.
These parts get extremely hot and will remain hot for a short time after operation.
7.8
Allow the engine to cool before making any adjustments or maintenance.
7. OPERATING INSTRUCTIONS
