18
6.17
Press the decompression valve in.
NOTE
this will need doing every time you try to
start the machine from cold and will automatically pop out once the starter handle
has been pulled.
6.17
Pull the starter handle swiftly 2 to 4 times or until the engine begins to fire. (
NOTE
the chainsaw may not start at this stage.
6.18
Once the engine has attempted to start, push the choke back in and pull the starter
handle again. The chainsaw should start at this stage.
6.19
Disengage the chain brake by pulling the handle backwards, away from the
chainsaw blade.
6.20
Allow the engine to warm up at half throttle for 20 seconds.
Summary of Contents for HYC6220
Page 31: ...31 NOTES...
Page 32: ...32...
