6.4.2.
To recharge the battery,
6.4.2.1.
Connect the battery charger (1) to a mains power socket; a green power light (3) will
come on indicating there is voltage.
6.4.2.2.
Insert the battery pack (2) into the battery charger (1), pushing it in completely.
Recharging a completely flat battery requires approximately 100 minutes.
6.4.2.3.
The recharging phases are indicated by the charge status lights (6),
6.4.2.4.
Battery charger connected = Green charge light (4) is on.
6.4.2.5.
Battery inserted and recharging in progress = Green power light (3) on and Charge
light (4) on (Red when charging).
6.4.2.6.
Recharging completed = Green charge light (4) on and Charge light (4) on (Green
when charged).
6.4.3.
Irregular condition = Green power light (3) fl Charge light (4) flashing.
6.4.4.
Short circuit = Charge light (4) flashing RED.
6.4.5.
Recharging a completely flat battery requires approximately 100 minutes.
6.4.6.
When recharging has been completed;
6.4.7.
Remove the battery pack (2) from the battery charger (1) and refit it on the machine.
6.4.8.
Disconnect the battery charger (1) from the mains power socket.
6.5.
Checking the battery status.
6.5.1.
To check the condition of the battery charge status press the small button (5) which
activates three charge status lights (6) which indicate the following;
6.6.
Managing the battery.
6.6.1.
The battery must be kept in environments where the temperature is not in the range of 0°C
+45°C. If the machine is stored in places where the temperature could exceed those limits,
please remove the battery and keep it in a suitable place.
6.6.2.
During use, the battery is protected against total drainage with a protective device that
switches OFF the machine and stops it from working.
6.6.3.
The battery is equipped with a guard that inhibits recharging if the environmental
temperature is not in the range of 0°C +45°C.
6.6.4.
The battery can be recharged at any time, even partially, with no risk of damaging it.
6.7.
Using the machine.
6.7.1.
Starting the machine (Fig 10).
6.7.1.1.
Before starting the machine;
6.7.1.1.1.
Insert the battery (1) in its housing.
When you release the switch, the safety button is also released and the engine
stops.
Page 13
Rev 2
Summary of Contents for HYC36LI
Page 1: ......
