14
6. STARTING & STOPPING PROCEDURE
NOTE
This machine is shipped without oil, therefore you
MUST
fill the engine with oil
before starting the engine. Failure to do so will result in engine damage which will not
be covered by warranty.
Fill with a 40:1 ratio of semi-synthetic 2 stroke oil and fresh unleaded petrol.
5.0
Before starting the engine you must check the following;
5.1
Check the work area, object/s to be cut and proposed cutting direction. You
MUST
remove and obstacles before starting work.
FROM COLD
5.3
Put the red choke lever (1) in the
CLOSED
(up) position.
5.4
Press the primer bulb (2) at least 8 times or until you see fuel fill the bulb.
5.5
Turn the power switch (3) to the ‘I’ one position.
5.6
Pull the recoil starter handle (4) until you feel resistance.
5.7
Once you feel resistance, pull the recoil starter handle swiftly upwards (5).
5.10
Repeat steps 5.6 & 5.7 until the machine starts.
1
2
3
4
5
Summary of Contents for HYBV26-2
