HYUNDAI
05
4. CHARGING MODES
HYBC-10 charger has seven (7) modes: STANDBY, 6V/2A, 6V/5A, 12V/2A, 12V/5A, 12V/10A and BOOST. Do
not operate the charger until you confirm the appropriate charge mode for your battery.
Mode
Display
POWER LED
Explanation
STANDBY
-
ON
Not charging or providing any power. If you want charging to
pause, press ON/OFF button and it will enter STANDBY mode.
6V/2A
02A
OFF
Connected to battery, it can turn into 2A by pressing CURRENT
button. This mode is recommended for 2-60AH batteries.
6V/5A
05A
OFF
Connected to battery, it can turn into 5A by pressing CURRENT
button. This mode is recommended for 10-150AH batteries.
12V/2A
02A
OFF
Connected to battery, it can turn into 2A by pressing CURRENT
button. This mode is recommended for 2-60AH batteries.
12V/5A
05A
OFF
Connected to battery, it can turn into 5A by pressing CURRENT
button. This mode is recommended for 10-150AH batteries.
12V/10A
10A
OFF
Connected to battery, it can turn into 10A by pressing CURRENT
button. This mode is recommended for 40-300AH batteries.
BOOST
FAS
OFF
Connected to battery, it can enter BOOST mode by pressing
BOOST button. It takes 5 minutes to charge.
BOOST mode is advanced charging mode that require your full attention before selecting.
Using 12V BOOST
To operate BOOST, the charger must be connected to a 12V lead-acid battery with the battery clamps
connected. For optimal results, allow boost to complete its 5-minute charge. After 300-second boost,
digital tube will show “000”, and your are ready to start your vehicle (whether FULL light is illuminated or
not). If unsuccessful when starting your vehicle, let the battery rest for 15 minutes and try boost again.
Most vehicles will start with one (1) boost. Do not use boost more than two (2) times within a 24-hour
period. If two (2) boosts cannot successfully start your vehicle, have your battery replaced or evaluated by
a local battery store.
Summary of Contents for HYBC-10
Page 11: ......
