HYBC
-10
04
3. ABOUT HYBC-10
1) The HYBC-10 is designed for charging all types of 12V lead-acid , including WET (Flooded), GEL, MF
(Maintenance-Free), EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat) batteries.
2) Built-in intelligent microprocessor makes charging faster, easier and safer.
3) This charger has safety features, including spark proof, protection for reverse polarity, short circuit,
overcurrent, overcharge and overheat.
4) Auto-memory: after power on, the display window of charger will show the last selected mode (except
BOOST mode). The charger will enter charging mode in 5 seconds around.
5) When the CHARGE LED is on, it is on charging; when the CHARGE LED is off and FULL LED is on, the
charging is completed. But do NOT break the connection immediately. It will automatically switches from
full charge to maintenance status to maintain batteries during prolonged periods of storage.
6) It shows present voltage when VOLTAGE button is pressed.
7) Following is the charger’s technical specification:
AC Input
AC 220~240V, 50/60Hz, 280W Max
DC Output
DC 6V 2A/5A, DC 12V 2A/5A/10A, DC 12V 15A 300s(Boost)
Efficiency
85% Approx
Power
280W Max
Start Voltage
> 3V
Charger Type
8 steps, Full-automatic Charging Cycle
Battery Type
All Types of 6V and 12V Lead-acid Batteries
Battery Capacity
2-150Ah (6V), 2-300Ah (12V), Maintains All Battery Sizes
Boost Mode
300s for 12V Lead-acid Batteries
Housing Protection
IP20
Ambient Temperature
0˚C ~ +40˚C
Summary of Contents for HYBC-10
Page 11: ......
