![background image](http://html.mh-extra.com/html/hyundai/hy2163/hy2163_user-manual_2197295009.webp)
Page 9
5.6.
Bevel Adjustment.
5.6.1.
The bevel angle can be adjusted between 0° and 45°.
5.6.2.
Loosen the bevel adjustment knob (10).
5.6.3.
Set the bevel angle by tilting the saw shoe (6) until the
mark indicates the desired angle on the scale.
5.6.4.
Tighten the bevel adjustment knob (10).
5.7.
Switching ON & OFF.
5.7.1.
For safety reasons the ON/OFF switch (7) of your tool is equipped with a lock-off button (8).
5.7.2.
Press the lock-off button to unlock the tool.
5.7.3.
To run the tool, press the ON/OFF switch (7).
5.7.4.
As soon as the ON/OFF switch is released the lock-off switch is automatically activated to
prevent unintended starting of the machine.
5.7.5.
Do not switch the tool on or off when the saw blade touches the work piece or other
materials.
5.7.6.
Do not operate the spindle lock while the tool is running.
5.8.
Holding and guiding the tool.
5.8.1.
Hold the tool by the main grip and the front handle (19)
to guide the saw properly.
5.8.2.
Guide the tool via the guide line of the laser liner.
5.8.3.
Lead the cord away in line with the rear of the tool.
5.9.
Using the laser.
Read the laser safety information carefully and follow all safety precautions. Not
following safety precautions could result in hazardous radiation exposure to your
eyes. Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
The laser should never be tilted or turned over while the laser indicator is lit.
The laser energy is not dangerous to exposed skin. However, if viewed directly or
form a reflection of a specular (mirror-like) surface, the emitted light from those
sources may be harmful to the human eye.
5.10.
Put the machine on the work piece;
5.10.1.
Press the laser on/off switch(12);
5.10.2.
Move alone the guide line produced by the laser light;
5.10.3.
Press the laser on/off switch to disengage the laser after work.
Summary of Contents for HY2163
Page 12: ...Page 12 ...