Page 13
6.16.
Drilling into metal
6.16.1.
To prevent the bit from slipping when starting a hole, make an indentation with a centre-
punch and hammer at the point to be drilled. Place the point of the bit in the indentation and
start drilling.
6.16.1.1.
Use a cutting lubricant when drilling metals. The exceptions are iron and brass which
should be drilled dry.
7.
GENERAL MAINTENANCE
To reduce the risk of personal injury and damage.
Never immerse your power tool, battery pack or charger in liquid or allow a liquid
to flow inside them.
To reduce the risk of injury always unplug the charger remove the battery pack
from the charger or power tool before performing any maintenance.
Never disassemble the power tool, Battery pack or charger. Contact a service
facility for ALL repairs.
7.1.
Keep your tool, battery pack and charger in good repair by adopting a regular maintenance
program.
7.2.
It is essential to keep the tool clean, remove dust or debris after each use, and pay particular
attention to the ventilation slots.
7.3.
Clean the housing with a soft cloth moistened with soapy water; do not use solvents such as:
Petrol, Alcohol, ammonia, etc…
7.4.
Ingress of dust and dirt can stop the chuck and switches operating blow out with compressed air
periodically and lightly lubricate with contact spray.
8.
SPECIFICATION
Battery
18V d.c. Li-ion, 2000mAh
Chuck size
13mm, 1/2"
No Load Speed
0~400, 0~1600rpm
Impact Rate
0~5200, 0~20800bpm
Max torque
45N.m
Charging Time
70 minutes
Net Weight
1.5kgs
Charger input
230VAC, 50Hz
Charger output
18VDC, 1.7Ah
9.
ENVIRONMENTAL
9.1.
Do not dispose of electric equipment together with household waste material! In observance of
European Directive 2012/19/EC on waste electrical and electronic equipment and its
implementation in accordance with national law, electric equipment that have reached the end of
their life must be collected separately and returned to an environmentally compatible recycling
facility. If electrical appliances are disposed of in landfills or dumps hazardous substances can leak
into the groundwater and get into the food chain, damaging your health and well-being.
9.2.
For further information on the disposal of this product, please contact your dealer or your nearest
domestic waste collection service.
Summary of Contents for HY2155
Page 1: ...18V COMBI HAMMER DRILL Model HY2155 User Manual...
Page 15: ...Page 15...
Page 16: ...Page 16...
