background image

vehicle tyre/tyre valve could be damaged by 

the high-pressure jet. The first indication of 

this is a discoloration of the tyre. Damaged 

vehicle tyres/tyre valves can be deadly dan-

gerous.

 

07

WARNING: High pressure jets can be

dangerous if subject to misuse. The jet

must not be directed at persons,animal, live

electrical equipment or the machine itself.

 

08

WARNING: High pressure hoses, fittings

and couplings are important for the safety

of the machine. Use only hoses, fittings

and couplings recommended by the

manufacturer. (it is extremely important

to protect these components against

damage by avoiding their improper use and

protecting them against bending, knocks

and scratches).

 

09

WARNING: Appliances not equipped

with

 T.S. 

– Total Stop : must not be left in

operation for more than 2 minutes with the

gun released. The recycled water heats up

considerably, seriously damaging the pump.

 

10

WARNING: Appliances equipped with

 T.S.

– Total Stop : these appliances should not be 

left in standby for more than 5 minutes.

 

11

WARNING: Switch the appliance off

completely (master switch on (0)OFF)

whenever it is left unattended.

 

12

WARNING:  Every machine is tested in its

operating conditions, so it is normal for a few 

drops of water to be left inside it.

 

13

WARNING: Take care not damage the

electric cable. If the supply cord is damaged, 

it must be replaced by the manufacturer, its

service agent or similarly qualified persons in

order to avoid a hazard

 

14

WARNING: Appliance with fluid under

pressure. Keep a firm hold on the gun and be 

prepared to take the kickback pressure. Only 

use the high pressure nozzle provided with

the appliance.

 

16

WARNING: This appliance is not intended

for use by persons (including children)

with reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use

of the appliance by a person responsible for

their safety.

 

17

WARNING: Children should be supervised

to ensure that they do not play with the

appliance.

 

18

WARNING:  Never start the high-pressure

cleaner without first completely unwinding

the high-pressure hose.

 

19

WARNING:  When winding and unwinding

the pipe take care not to cause the high-

pressure cleaner to overturn.

 

20

WARNING:  Before unwinding or winding

the hose, switch the machine off and release 

the pressure in the hose itself (switching off).

 

21

WARNING:  Risk of explosion — Do not

spray flammable liquids.

 

22

WARNING:  To ensure machine safety,

use only original spare parts from

the manufacturer or approved by the

manufacturer.

 

23

WARNING:  Do not direct the jet against

yourself or others in order to clean clothes or 

foot-wear.

• 

24

WARNING: High pressure cleaners shall not 

be used by children or untrained personnel.

• 

24b

WARNING: Water that has flown through

backflow preventers is considered to be

non-potable.

• 

25

WARNING:  the machine shall be

disconnected from its power source, by

removing the plug from the socket-outlet,

during cleaning or maintenance and when

replacing spare parts 

 

26

WARNING: Improper extension cables can be

dangerous. If an extension cord is used, it must

be suitable for outdoor use, and the connection

must be kept dry and clear of the ground. It is

recommended that this be done using a cable

reel that holds the plug at least 60 mm from the

ground.

• 

27

WARNING: If an extension cord is used, the plug 

and socket must be of watertight construction.

 

28

WARNING: During the use of high pressure

cleaners, aerosols may form. Inhalation of aero-

sols can be dangerous to health. 

29

WARNING: Depending on the application,

shielded nozzles can be used for high pressure

cleaning, which will drastically reduce the emis-

sion of hydrated aerosols. However, not all ap-

plications allow the use of such a device. If the

armored nozzles are not applicable for aerosol

protection, a respiratory mask of class FFP 2 or

equivalent may be necessary, depending on the

cleaning environment.

WARNING:  It is absolutely forbidden to

use the machine in potentially explosive

EN

1

2

Summary of Contents for HY155HPW-1





























Reviews: