background image

0-1

FOREWORD

FOREWORD

1. STRUCTURE

1. STRUCTURE

This service manual has been prepared as an aid to improve the quality of repairs by giving the
serviceman an accurate understanding of the product and by showing him the correct way to
perform repairs and make judgements.   Make sure you understand the contents of this manual and
use it to full effect at every opportunity.
This service manual mainly contains the necessary technical information for operations performed in
a service workshop.
For ease of understanding, the manual is divided into the following sections.

SECTION 1  GENERAL

SECTION 1  GENERAL
This section explains the safety hints and gives the specification of the machine and major 
components.

SECTION 2  STRUCTURE AND FUNCTION

SECTION 2  STRUCTURE AND FUNCTION
This section explains the structure and function of each component.   It serves not only to give an 
understanding of the structure, but also serves as reference material for troubleshooting.

SECTION 3  HYDRAULIC SYSTEM

SECTION 3  HYDRAULIC SYSTEM
This section explains the hydraulic circuit, single and combined operation.

SECTION 4  ELECTRICAL SYSTEM

SECTION 4  ELECTRICAL SYSTEM
This section explains the electrical circuit, monitoring system and each component.   It serves not 
only to give an understanding electrical system, but also serves as reference material for trouble 
shooting.

SECTION 5  MECHATRONICS SYSTEM

SECTION 5  MECHATRONICS SYSTEM
This section explains the computer aided power optimization system and each component.

SECTION 6  TROUBLESHOOTING

SECTION 6  TROUBLESHOOTING
This section explains the troubleshooting charts correlating problems

problems to causes

causes.

SECTION 7  MAINTENANCE STANDARD

SECTION 7  MAINTENANCE STANDARD
This section gives the judgement standards when inspecting disassembled parts.

SECTION 8  DISASSEMBLY AND ASSEMBLY

SECTION 8  DISASSEMBLY AND ASSEMBLY
This section explains the order to be followed when removing, installing, disassembling or 
assembling each component, as well as precautions to be taken for these operations.

The specifications contained in this shop manual are subject to change at any time and without any 
advance notice.   Contact your HYUNDAI distributor for the latest information.

Find manuals at https://best-manuals.com

Summary of Contents for HX500L










































Reviews: