ENG - 60
VIDEO SETUP PAGE:
COMPONENT VIDEO:
OFF:
Set video output to the composite.
YUV
: Set video output in analog component video format when connecting to Y/U/V terminals.
P-YUV
: Set progressive YUV signals. Connection same as YUV.
RGB
: Set video output in Red/Green/Blue format when connecting to SCART terminal.
P-RGB
: Progressive RGB signals. Connection same as RGB.
Note:
If the video setting differs with the physical connection, the TV set may not have picture. In this
case, you can RESET the machine, then keep pressing key [V_MODE] until the picture returns
again.
COLOR SETTING SETUP:
COLOR SETTING
includes: SHARPNESS, BRIGHTNESS, CONTRAST,
GAMMA, HUE, SATURATION and LUMA DELAY .
Adjust each item in the Color Setting to get the suitable color output of the TV screen.
SHARPNESS
: There are three optional output modes: HIGH\MEDIUM\LOW.
BRIGHTNESS
: Use the left/right direction key to move the scroll and adjust the brightness.
CONTRAST:
Use the left/right direction key to move the scroll and adjust the contrast.
GAMMA:
There are four optional output modes:
HIGH\MEDIUM\LOW\NONE.
HUE:
Use the left/right direction key to move the scroll and adjust the hue.
SATURATION :
Use the left/right direction key to move the scroll and adjust the saturation.
LUMA DELAY:
In this item you can choose 0T or 1T .
Summary of Contents for HTX927
Page 17: ...CZ CZ 17 Technické údaje ...
Page 34: ...SK 34 Technické údaje ...
Page 51: ...Dane techniczne PL PL 51 ...
Page 68: ...Seoul Korea ...
