Hyundai HST4020, Instructions Manual

Page: 14 / 17

0083 12
9.4 Preparing the device for transport
a) Drain the petrol tank using a petrol extraction pump.
b) Always let the engine run until it has used up the remainder of petrol in the tank.
c) Empty the engine oil from the warm engine.
d) Remove the spark plug boot from the spark plug.
e) Clean the cooling fins of the cylinder and the housing.
f)
Remove the push bars if necessary. Ensure that the cables are not kinked.
9.5 Ordering replacement parts
Please quote the following data when ordering replacement parts:
a) Type of machine
b) Article number of the machine
c) Identification number of the machine
d) Replacement part number of the part required For our latest prices and information please go
to www.ducar.cn
10.
Cleaning, maintenance and ordering of spare parts
The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to the raw material system. The unit and its accessories
are made of various types of material, such as metal and plastic. De
‐
fective components must be
disposed of as spe
‐
cial waste. Ask your dealer or your local council.
11.
Troubleshooting guide
Fault Possible causes Remedy
The motor does
not start Engine brake lever not
pressed
Spark plug defective Press the engine brake lever
Replace spark plug
Top up fuel
Engine does not
run smoothly Air filter dirty
Spark plug worn
Choke open Clean the air filter
Clean/Replace the spark plug
Set
choke lever to “Run” position
The equipment
does not
operate
smoothly and
‐
Blades imbalanced
‐
Have the blades replaced by a cus
‐
tomer
service workshop.
Motor is running,
roller
‐
V
‐
belt torn
‐
Have the V
‐
belt replaced by a cus
‐
tomer
service workshop.