6
6
.
.
C
C
O
O
N
N
T
T
R
R
O
O
L
L
M
M
O
O
D
D
E
E
16
setting temperature and operate in Cooling mode, and the indoor motor speed is low. During this
operation, the air flow direction could be set but the air volume is unavailable, and the setting
temperature can only be adjusted by
2℃
up and down(the minimum accuracy is
1℃).
When the appliance run in this mode, it will not influenced by under the
18℃
limit.
4.4 Heating mode operation
4.4.1 The 4-way reversing valve is turn ON under the Heating mode.
4.4.2 During this mode operation, the setting temperature and air volume can
be adjusted, and the air flow direction could be swang.
When the appliance run in normal condition, the room’s temperature can only
be adjusted by 1℃ up and down base on the setting temperature, the compressor
operation diagram is shown as following.
When the temperature rose, the compressor will be power ON.
4.4.3 Indoor fan motor operation
Anti-cold air system:
When the appliance run in Heat mode condition, the indoor fan motor operation is
shown as following to prevent the cooling air come out during the appliance operation.
When the appliance turn in the anti-cold air system in the Extra-LOW (Tapped
motor set in LOW,
sic passim) during the compressor operation, the louver swang to the Cool air
protection position, the louver recovers to the original position after the air volume change to
LOW. When the room temperature reach to the setting temperature, the compressor will be turn
off, and the air flow change to LOW, the louver swang to the Cool air protective position to
prevent the air drop into human body directly; when the indoor pipe coil temperature drop
Tem
p
er
ature fa
ll
Tem
p
er
ature rise
30℃(#27)
The setting air flow
The setting air flow
35℃(#26)
25℃(#28)
Low
Extra-low
Stop
Stop
Tem
p
er
ature fa
ll
Tem
p
er
ature rise
Compressor power OFF
The setting temp. minus 1
℃
The setting temp. plus 1
℃
Compressor power ON
Compressor power ON
Compressor power OFF
Summary of Contents for HSH-P182NDC
Page 1: ......
