background image

• Disconnect the mains plug from the 
socket. 

Only separate the high-pressure hose 
from the trigger gun or the device when 
there is no pressure in the system. 

TURN OFF TAP 

• Pressure the lever of the trigger gun to 
release any remaining pressure in the 
system. 

• Release the lever of the trigger gun. 

• Lock the lever of the trigger gun. 

ATTENTION 

• When disconnecting the supply or 
high-pressure hose, warm water may 
leak from the connection after 
operation. 

• Detach the appliance from the water 

supply. 

Transportation 

CAUTION

 

Risk of personal injury or damage! 

Mind the weight of the appliance during 
transport. 

When transporting by hand 

• Switch the product off and disconnect 
it from the water and power supply. 
• Pull out the transport handle until it 
audibly snaps into place. Attach 
transportation guards, if applicable. 
• Pull the appliance by its transport 
handle.   

When transporting in 
vehicles 

• Prior to horizontal transport: close the 
cap of clean detergent bottle. 
• Tilt the product towards you until it 
balances on the wheels. Then move it 
by its transportation handle. 
• Protect the product from any heavy 
impact or strong vibrations which may 
occur during transportation in vehicles. 
• Secure the appliance against shifting 

and tipping over. 

Storage 

CAUTION 

Risk of personal injury or damage! 

Consider the weight of the appliance 
when storing it. 

Storing the appliance 

• Park the machine on an even surface. 
• Detach spray lance from the trigger 
gun. 
• Pull the high-pressure hose out of the 
trigger gun. 
• Place the trigger gun into its support 
• Place the others accessories in their 
support behind the machine.     
• Coil the high-pressure hose and hang 
it over the hose storage. 
• Prior to extended storage periods, as 
during the winter, also observe the 
instructions in the care section. 
• Always store the pressure cleaner, 
parts, and accessories in a place that is 
inaccessible to children. The ideal 
storage temperature is between 10 °C 
and 30 °C. Store the power washer 
indoors to prevent the water in the unit 
from expanding under freezing 
conditions. 
• We recommend using the original 
package for storage or covering the 
product with a suitable cloth or 
enclosure to protect it against dust. 

Frost protection 

ATTENTION

 

Appliance and accessories that are not 
completely drained can be destroyed by 
frost. 
Completely drain appliance and 
accessories and protect them against 
frost. To avoid damage: 
• Detach the appliance from the water 
supply. 
• Detach spray lance from the trigger 
gun. 
• Turn the “0/1” switch to the position 1 
to switch on the machine 
• Push the lever of the trigger gun until 

Summary of Contents for HNHP2065




















Reviews: