Hyundai HLT-3220, Service Manual

Page: 58 / 96

SERVICE MANUAL
PAGE:
58
ADJUSTMENT INSTRUCTION
WITH DEFAULT FACTORY DATA
1.SVC mode data Adjustment
NOTE!!
When the EEPROM has been replaced, the SVC data should be restored as the
function of individual system and specification.
[ Enter and exit SVC mode ]
Note: into the SVC mode, Initialize with default data.
1) Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same
time to get into SVC mode.
2) Press the Yellow button several times to find SVC Data.
3) Input the corresponding SVC data referring to Table below with the Volume Up/down
key.
4) Press the OK button to memorize the data.
5) Press TV/AV button to exit SVC mode
2-1. Factory outgoing setting & Initialize with default data (into the SVC mode).
PAGE ITEM
Factory
outgoing
setting
Initialize
with default
data Ex
REMARK
AGC
15 15
Variable Data(0-31)
RD
127 127
PC Contrast Coefficient-RED(0-255)
GD
127 127
PC Contrast Coefficient-GREEN(0-255)
BD
127 127
PC Contrast Coefficient-BLUE(0-255)
RO
79 79
PC Brightness Coefficient-RED(0-63)
GO
79 79
PC Brightness Coefficient-GREEN(0-63)
BO 79 79
PC Brightness Coefficient-BLUE(0-63)
PC CP 5 5
PC Charge Pump(0-7)
DATA 1
50 PR * * means current program NO.
FP
52 52
FM Prescaler(0-127)
NP
122 122
NICAM Prescaler(0-127)
SP
63 63
SCART Prescaler(0-127)
S1 VOL
44 44
SCART1 Volume(0-127)
S2 VOL
44 44
SCART2 Volume(0-127)
DATA 2
50 PR * * means current program NO.
0 100PR
200PR 0 0
1 200PR
0
Not apply to TEXT
TEXT 1 1
1 Apply to TEXT
0 TELETEXT TOP OFF
TOP 1 1
1 TELETEXT TOP ON
0 Apply to COMPONENT
SCART 1 1
1 Apply to SCART
0 Not apply to ACMS
ACMS 1 1
1 Apply to ACMS
0 Used except for CHINESS or AUSTRALIA
CH+AU 0 0
1 Used CHINESS or AUSTRALIA
0 BG/I/DK
1 BG/I/DK/L
2 BG/I/DK/M
SYS 1 1
3
RESERVED
50 PR * * means current program NO.
DATA 3
106 Opt 1 Translate HEX into DEC(DATA3VALUE1)