20
8.0
Draining the fuel system.
WARNING
All fuels are flammable and the proper precautions and procedures must be followed
when handling fuels as they are a source of fire or explosion.
Fuel must always be stored in the proper containers.
WARNING
When working with fuels you must always work in a well ventilated areas and avoid
breathing petrol fumes.
8.1
With the fuel valve
OFF
, remove the carburetor drain screw.
8.2
Drain the fuel from the carburetor into a suitable container.
8.3
If the fuel in the fuel tank is to be drained, turn the fuel valve
ON
and drain the fuel
from the fuel tank in to a suitable container.
8.4
Replace the drain screw and turn the fuel valve to the
OFF
position.
Stoppage Time
Recommended service procedure to prevent hard starting
Less than 1 month
No preparation required
1 to 2 months
Fill with fresh fuel
2 months to 1 year
Fill with fresh fuel
Drain the carburetor float bowl
1 year or longer
Drain the fuel tank
Drain the carburetor float bowl
Pour 5ml of oil down the cylinder bore
Fill with fresh fuel
Use fuel conditioners that are formulated to extend storage life.
8.5
Remove the spark plug and pour a tablespoon of clean engine oil into the cylinder
bore. Crank the engine a few revolutions to distribute the oil then reinstall the spark
plug.
8.6
Slowly pull the recoil starter handle until resistance is felt. At this point the piston is
coming up on its compression stroke and both intake and exhaust valves are closed.
Storing the engine in this position will help to protect it from internal corrosion.
8.7
Change the engine oil.
8.8
Check the air filter and clean as necessary.
8.9
Cover the generator with a sheet to keep out dust.
7. STORAGE
Summary of Contents for Hirepro HY10000
Page 24: ...24 ...
