Hyundai HHD SERIES, User Manual

Page: 24 / 45

24
4.2 Using the Generator with your Appliances
After starting the generator you can connect your devices to it. If you want to use the
120V outlets, be sure to move the "Voltage Switch" is in the right position. Before
starting make sure that you know what you are able to power with your Generator.
Here's how you can decide: Add the watt ratings of all the loads that the generator set
will be powering at the same time. Make sure that total wattage will not exceed the
generator rating.
EXAMPLE: A generator set rated 5000W can power two 1500W heaters, a 900W
circular saw, a 500W drill and a 100W light at the same time (4500W combined).
However, to operate a second 900W saw, it will be necessary to disconnect one of the
1500W heaters.
1. Turn off the switches of devices before
connecting them to your generator.
2. Insert the plug of the device into your
generator based on its voltage requirements.
3. You can now turn your devices on and use
them.
To stop the engine in an emergency, turn the engine switch “OFF”. Always
connect the generator to the ground terminal to prevent electrical shock.