14
37
Getting
Started
Turning Handset On/Off
Nothing will appear on the display when the battery power is very low. You should
fully charge the handset before using it.
Note
Registering a New Handset
You can register to your base additional handsets (up to 5 in total) in order
to share the same line with other people. To do that you should assign a
number to each new handset you will register. As you know, the supplied
handset is already registered with the number 1, in fact it shows
. For
security reasons, the registration procedure can be done only by people
who are nearby your base and know the
PIN which acts as phone's
authentication code.
HS(1)
base
1
2
Press
key to display the main menu items.
MENU
3
4
Press the
or
key to choose
, then press
the
key.
Up
Down
Register H/Set
SELECT
Press the navigation keys
repeatedly to choose
, then
press the
key.
SELECT
H/Set Setting
When you place the handset on the base, it automatically turns on.
(when it's off), press the
button then you switch
the display on.
, keep the
button pressed until "
"
message appears. Then the display turns off.
To turn the handset on
To turn the handset off
Goodbye!
Press and hold the
button on the base unit for about 3 seconds,
then release the button.
PAGE
Handset
&
Base
Setting
Setting Display
This adjustment will allow you to optimize the visibility of the display by
changing its contrast according to the environment conditions.
1
Press
key to display the main menu items.
MENU
2
3
Press the
or
key to choose
, then press
the
key.
Up
Down
Display setting
SELECT
Press the navigation keys
repeatedly to choose
, then
press the
key.
SELECT
H/Set Setting
4
Press the
key to access
. The current setting
appears on the display.
SELECT
Contrast
5
Press the navigation keys
repeatedly to choose among the 11
available contrast levels, then press the
key.
SELECT
Using this feature, you can customize the standby display according to your taste
and needs (wallpaper and color).
Adjusting the Display Contrast
1
Perform steps 1 to 3 of previous paragraph.
2
Selecting the Wallpaper
Press the
or
key to choose
, then press the
key. The current setting appears on the display.
Up
Down
Wallpaper
SELECT
3
Press the navigation keys
to choose among 10 pre-defined
wallpaper images, then press the
key.
SELECT
