24
5. Dip the foam element in clean engine oil, then squeeze out all excess oil.
The engine will smoke when started if too much oil is left in the filter.
6. Wipe dirt from the air filter unit and cover using a moist rag.
5.5 - Oil Change and Oil Drainage
Used motor oil can cause skin irritations if left in long-tern contact with skin.
Wash hands thoroughly with soap and water after handling oil.
Do not dispose of used oil in drains or on soil. Local service shops provide
environmentally-friendly disposal methods.
1. Stop the engine and remove oil filler cap.
2. Place a pan under the engine.
3. Remove the oil drain screw and allow the oil to completely drain into the
pan.
4. Reinstall drain screw before filling the engine with fresh oil. Do not
overfill oil reservoir. Use a funnel to prevent spillage.
5. Reinstall the filler cap and tightly fasten it.
Summary of Contents for HCP9100
