29
6.0 - TROUBLESHOOTING
Common issues can be fixed by following the instructions in this guide. If the unit
will not function after following these instructions, contact technical support before
attempting to use or repair the product.
ISSUE
CAUSE
ACTION
Engine cranks
slowly
Engine oil is too heavy
Replace with recommended oil
Load is connected
Disconnect load while starting
Engine is not
starting
No fuel
Refill fuel tank
Fuel valve is closed
Fully open fuel valve
Fouled spark plug
Remove, clean or replace spark plug
Not enough oil
Add more oil
Black exhaust
Choke stuck in closed position
Open choke
Dirty air filter
Clean air filter
Rich fuel mixture
Contact customer service
Engine stops
No fuel
Refill fuel tank
Not enough oil
Add more oil
Engine has dif-
ficulty idling
Loose spark plug cable
Reconnect or repair cable
Faulty spark plug
Remove, clean or replace spark plug
Pressure Washer set not level
Move Pressure Washer to a level surface
Dirty fuel filter
Replace the filter
Low / No
Pressure
Insufficient water supply
Replace garden hose for a larger diameter
one, ensure that water source is turned
on fully
Spray Gun Leaks
Inspect for source of leak and contact
customer service
Clogged Nozzles
Inspect nozzle and clean as required
Incorrect nozzle (low-pressure)
Replace with appropriate nozzle
Pump does not
reach sufficient
pressure
Incorrect nossle (low pressure)
Replace with appropriate nozzle
Insufficient water supply
Replace garden hose for a larger diameter
one, ensure that water source is turned
on fully
Summary of Contents for HCP3000
