![background image](http://html.mh-extra.com/html/hyundai/hcp3000/hcp3000_user-manual_2197169021.webp)
21
hold the trigger down until all pressure is released before starting up again.
Attempting to start the engine without releasing the pressure can severely
damage your pressure washer. Failure to release built-up pressure may result
in startup difficulties and permanent damage to pump and other components.
4.4 - Using the Pressure Washer
Wear safety goggles and pay close attention to where the spray wand is aimed.
Do not look away while it is in use and ensure that there are no distractions
nearby. Do not use near children, animals or delicate electrical equipment.
Do not direct the wand directly at a flat surface prior to pressing the trigger
handle. To prevent surface damage, keep nozzle tip a minimum of 20" away
from the surface being cleaned.
USING THE SPRAY GUN
1. For increased safety and control use both hands when operating the
spray gun. Aim away from intended surface (at pavement or soil) prior to
pressing the trigger handle.
2. Hold the wand shaft with one hand while firmly holding the handle with
the other. Slowly press the trigger handle.
3. Release trigger handle to stop water flow.
SAFETY FEATURES
A safety lock is located on the handle close to the trigger. Make sure that this lock is
always engaged when the pressure washer is not in use.
Summary of Contents for HCP3000
