BLADE CHANGE PROCEDURE
To change
scraping blades:
Stop Engine.
Loosen the smaller
Clamp Bolts
at
the rear of the
blade holder using
a ¾” open
-end
wrench. Slide the
dull blade out.
Loosen the
Hold-
Down Bolts
if
necessary to fit the
replacement blade
against the
Blade
Step
. Retighten
the
Hold-Down
Bolts
by hand and
then retighten the
Clamp Bolts
with your wrench. Lower the blade and resume scraping. With a little practice,
you should be able to change the blades in 15 seconds. Dull blades may be sharpened and reused
many times.
Operators should lower the blade by pressing the left hand lever forward each time they get off
the machine. This safety practice eliminates possible bodily injury from running into the blade
or lowering of the blade by unauthorized operators.
Blade
Blade Step
Hold-Down Bolts
TWF-028
Clamp Bolts
TWF-029
