Hyundai H-VCH01, Instruction Manual

Page: 4 / 12

4.

The manufacturer reserves the right to introduce minor changes into the
product design without prior notice, unless such changes influence significantly
the product safety, performance, and functions.

Production date mentioned on the unit and/or on the packing materials and
documentations.
VACCUUM CLEANER ASSEMBLY

Unpack the device.

Open the clip located on the motor unit and insert and connect the metallic stick
into this opening.Secure the stick by closing the clip until it locks into place.

Insert and connect the floor nozzle at the lower opening of the main body of the
hand vacuum cleaner.

Crevice/Furniture nozzle is for cleaning sofa, curtain or dust on the decorative
surfaces, corners and between cushions. To clean furniture and decorative surfaces
turn the nozzle in the arrow shown direction.
OPERATION

To get started you need to lower the nozzle "floor-carpet", so she clung to the floor.

Connect the plug of the device to the mains wall socket.

Press the ON/OFF switch to activate the vacuum cleaner. To disactivate it press the
ON/OFF switch once again.

For cleaning of easy-available surfaces, car, furniture use vacuum cleaner without
metal stick.

To disassemble metal stick from the body of vacuum cleaner, open the clip and pull
the stick upward.

WARNING!

Be sure to clean the container after each cleaning.

Never use the vacuum cleaner without installed filter and with damaged or dirty
filter. Otherwise, dust will fall into the motor and cause damage to the vacuum
cleaner.

Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the
container is filled, dirty air clogs up the vacuum cleaner filter and the engine can
overheat and disable.

Don’t use the vacuum cleaner for cleaning of material debris such as cement,
whitewash, plaster, metal shavings and etc. These particles cause to the engine
damage.

Don’t wash vacuum cleaner parts in a dishwasher or a construction mac
hine.
CLEANING AND MAINTENANCE

Switch off your vacuum cleaner and disconnect the plug of the device from the
mains wall socket.

Remove the floor brush from the body of the vacuum cleaner by pulling it
downward.

Disconnect the metal stick.

Disconnect dust bowl from the vacuum cleaner. For that press the dust bowl release
button. Empty the dust bowl.

Dust bowl can be opened without disassembling the dust bowl from the body of
vacuum cleaner. For that press the dust bin lower lid release button. We
recomment to empty dust bowl after each usage.