Hyundai H-SA1004, Instruction Manual

Page: 5 / 15

5
Installation/Connection
Speaker connection
This amplifier can operate in one-, two-,
three- or four-channel mode. The minimum
impedance for single channel bridged operation
is 4 or 8 ohms, mono operation 2 - 4 Ohm. Tri-
channel power is referred to stereo and mono
at the same time. Minimum impedance remains
the same for three channel (front/subwoofer)
systems when proper passive crossovers are
used. Connect right and left speaker wire to
corresponding speaker output terminals of the
amplifier. Be sure to have the positive wire from
the speaker connected to the positive speaker
terminal of the amplifier and the negative
wire from the speaker must connect with the
negative terminal of the amplifier. Reversing
any of the connections will result in the speaker
cones moving out of phase which causes bass
cancellation.
4-channel stereo configuration
Battery
Connect
to chassis
ground of
vehicle
Speaker
2-4 Ohm
Speaker
2-4 Ohm
Connect to remote
turn-on lead of the
head unit
Speaker
2-4 Ohm
Speaker
4-8 Ohm
Battery
Connect
to chassis
ground of
vehicle
Speaker
4-8 Ohm
Speaker
4-8 Ohm
Battery
Connect
to chassis
ground of
vehicle
2-channel bridged mode configuration
3-channel bridged mode configuration