Hyundai H-DEH1-10L-UI006, Instruction Manual

Page: 3 / 44

3.
EN
Dehumidifier
Dear Customer!
We thank you for your happy choice and buying of an air drier Hyundai. It will serve you for a long
time.
1. IMPORTANT INFORMATION
The appliance is designed for drying of air in domestic conditions.
The manufacturer reserves the right to introduce changes in design, configuration and process -
ing of the article with a view to improve its properties without any prior notification of customers.
There may be some misprints in text and digital notations of the present manual.
If after reading of this manual you have any questions concerning work and operation of the
appliance, please, refer to a shop assistant or to a specialized service center for further explana-
tions.
The article has a label with all the needed technical data and other useful information about the
appliance.
Use the appliance only for its intended purpose indicated in this manual.
To avoid damaging of the appliance and cancellation of your warranty, before beginning of work
after transportation, please, set the drier upright (as depicted on the cover) at least 2 hours
before operation.
2. PRECAUTIONS
1. DON’T CLOSE VENTS! Make sure that vent inlet and outlet are free.
2. Don’t insert foreign objects in air-outlet grille of the drier. It is very dangerous, since the fan
revolves at high speed.
3. Install the appliance only on a horizontal surface to avoid water leakage.
4. Don’t install the appliance in the following locations:
- where it is exposed to direct sunlight;
- near sources of open flame;
- near other working heating appliances;
- where the appliance may be exposed to water splashes or steam.
5. Don’t use the appliance in explosive or corrosive environment. Don’t keep petrol and other
volatile flammable liquids near the drier – it’s very dangerous!
6. Don’t use the appliance only for drying (reducing of humidity level) of air in domestic prem -
ises.
7. Clean the filter occasionally to ensure efficient work of the appliance.
8. To ensure reliable work of the compressor, don’t incline the appliance.
9. To avoid electric shock, a damaged power cord should be replaced only in authorized service
centers by qualified specialists.
10. Connect the appliance only to 220-230V 50Hz network. If needed, find out characteristics of
your network from power suppliers.